Start with the price per watt
Divide the total price before incentives by the system size in watts. A 7.2 kW system at $24,480 is $3.40 per watt. This is the one number that lets you compare quotes of different sizes. The national median for 2025 installations, reported by Lawrence Berkeley National Laboratory, was $3.60 per watt for systems owned by the homeowner without a battery. Prices vary by state, roof and equipment, so treat the median as a reference point.
Loan quotes need a second look. Many low-interest solar loans include a dealer fee, often 10% to 30%, added to the price. Ask for the cash price of the same system.
The incentive lines
Go through each incentive the proposal subtracts and ask four questions.
Does it exist today? Look it up on your state page. Proposals are generated by software whose incentive tables lag behind the law. The most common error in 2026 is a 30% federal tax credit shown against a system the homeowner is buying. That credit does not apply to installations completed after 31 December 2025.
Is it open and funded? A rebate with an exhausted budget, or a credit with an annual allocation that is already spoken for, is worth nothing to you this year.
Do you qualify? Check income limits, utility territory, primary-residence rules and whether the incentive excludes leased systems.
Can you use it? A nonrefundable state credit is worth only as much as the state tax you owe over the carryforward period.
Then check the form: a proposal that shows "net cost after incentives" as the headline price is showing you a figure you do not pay the installer. You pay the gross price. The incentives arrive later, from someone else, if they arrive.
The savings projection
Three assumptions drive it.
Production. The proposal states expected kilowatt-hours in year one. Divide by system size in kW. The result should be near the production figure on your state page for a south-facing roof, and lower for east, west or shaded roofs. A number well above it needs explaining. Ask whether production is guaranteed in the contract.
Export value. This is where proposals most often flatter the result. Find out whether the model assumes full net metering. Compare that with the rule that applies to a new customer of your utility, on your state page under "Net metering and export credit". If exports earn a fraction of the retail rate, a proposal that values every kilowatt-hour at retail overstates savings, sometimes by a third or more.
Utility rate escalation. Proposals assume electricity prices rise every year, commonly by 3% to 5%. Over 25 years, 5% compounds to a price 3.4 times today's. Ask what rate is assumed and rerun the numbers at 2% in the incentive calculator. If the system only pays back under the higher assumption, you are being asked to bet on rate increases.
Battery proposals
A battery roughly doubles the price of a typical system. The proposal should show what the battery adds in savings separately from the panels. Its value comes from three places: shifting exports into self-use where export rates are low, payments from a battery program, and backup power, which has a value only you can judge. If the proposal claims a federal tax credit on a battery you are buying, it is out of date.
Lease and PPA proposals
Ask for the payment in every year of the term, in dollars. Check the escalator. Compare the price per kWh with your current utility rate and with the export rate, since under a PPA you pay for exported power too. See leasing, PPAs and buying compared.
Pressure and promises
Treat the following as reasons to slow down:
- a price that is valid only if you sign today;
- a statement that an incentive is "about to expire" that you cannot confirm on the administering agency's page;
- "no cost" or "free" solar that turns out to be a 25-year contract;
- a claim that the company is affiliated with your utility or a government program;
- reluctance to put production estimates or incentive assumptions in writing.
Every state has a consumer protection office, and several now require specific disclosures in solar contracts. Where a state has such a law, it is listed on the state page.
A ten-minute check
- Price per watt, and the cash price if a loan is quoted.
- Each incentive line against your state page.
- Year-one production divided by system size.
- The export rate assumed against the rule for your utility.
- The utility escalation rate assumed.
- Your own run of the calculator with conservative inputs.
My quote shows a 30% federal tax credit. Is that right?
Not if you are buying the system and it will be installed after 31 December 2025. The residential credit ended on that date. If the quote is for a lease or PPA, the company may be claiming a business credit, which it receives, not you.
What is a reasonable price per watt?
The national median for homeowner-owned systems installed in 2025 was $3.60 per watt before incentives, according to Lawrence Berkeley National Laboratory. Local prices differ, and batteries, difficult roofs and premium equipment add to it.
How do I know if the savings estimate is realistic?
Check three inputs: annual production against your state's typical figure, the export rate against your utility's actual tariff, and the assumed rise in electricity prices. Then recalculate with cautious values.
Should the installer handle incentive paperwork?
Installers usually file rebate and interconnection applications. Tax credits are claimed by you on your own return. Get in writing which applications the installer is responsible for and what happens to the price if a rebate is refused.
Related
- Going solar after the federal tax credit endedWhat the end of the 30% credit changes for price, payback and how solar is sold.
- Solar payback period: how it is calculatedThe formula, the inputs that move it, and what it leaves out.
- How to verify a solar incentive yourselfWhere each kind of incentive is written down, and how to find the current version.